Seamstick 10mm - Lampshade Seam Double-Sided Tape

Seamstick is the ultimate double-sided tape for securing lampshade seams.



Use with our Lampshade Seam Roller to apply firm pressure.

How to use

• Do not use in cold conditions, the seam stick tape and your room needs to be warm ( 15c - 30c)
• Surfaces need to be clean and dry
• Apply the tape to the lampshade panel, and remove the release paper
• Join the seam together
• Place the lampshade on a clean flat hard surface and use  Seam Roller to apply firm even overall pressure(see image)

Features
Width: 10mm
Qty: 25mtr roll
 

Technical

Temperature Resistance:
- 40°C to + 90°C, the short term even up to +120ºC

Liner
Polyester film, transparent, both sides siliconised
Thickness 75 µm

Adhesive
Modified acrylate,
Coat weight 250g/m² each side

Carrier
Synthetic textile, translucent
Weight 80g/m²

Tape thickness
Approx. 0,50mm excl. liner
Adhesion (N/25mm)   in accordance with AFERA 5001
Steel         30      
Aluminium  29   
Glass      31      
PMMA      32               
PVC       28   
PP        21
PE        16  
Cohesion (N/625mm²)   in accordance with AFERA 5012
20ºC      10

Please note: Some textiles utilise a silicone treatment to confer scotchguarding, anti-stain properties, soft-feel, or to make printed designs sit on the surface and appear vibrant. This will reduce the efficacy of the tape and in extreme cases may repel the adhesive entirely. We recommend testing a small piece of your fabric with the tape before use and spot-gluing the seam with a clear-drying super glue gel.
If you require any help or advice please do not hesitate to contact our customer service team at info@dannells.com