Manufacturing Pack - 30  x  30cm Rounded Square Lampshades
Manufacturing Pack - 30  x  30cm Rounded Square Lampshades
Manufacturing Pack - 30  x  30cm Rounded Square Lampshades
Manufacturing Pack - 30  x  30cm Rounded Square Lampshades
Manufacturing Pack - 30  x  30cm Rounded Square Lampshades

Manufacturing Pack - 30 x 30cm Rounded Square Lampshades

£200.00 Exc. VAT
£240.00 (inc. VAT)
You will earn 240 points with this purchase

We have made it easy for you to design and manufacture your own lampshades using your covering of choice, any piece of fabric or wallpaper can be used with our lampshade manufacturing packs. All the essential components supplied compactly at the most economical rates with full instructions on how to make the lampshades.

This pack will make you 30 x Rounded Square Lampshades size 30cm x  21cm high from the covering of your choice, that can be used as a Pendant (ceiling), or with a suitable Table Lamp.
 

What type of lamp holders will fit this lampshade?
The frame is manufactured to fit European lamp holders, and a Converter/Reducer Adaptor plug is supplied fitted to reduce the aperture
so it can fit UK lamp holders. 

 
Lampholder Types
B22 Bayonet Cap  Lampholders (UK) -  Adaptor Fitted
E14 Edison Screw Lampholders  (EU)    Adaptor Fitted
E27 Edison Screw Lampholders  (EU)    Adaptor Removed
E26 Edison Screw Lampholders  (US)    Adaptor Removed


Harp & Finial Fittings
If you wanted to use the frame with a Harp & Finial fittings, used mainly in the USA, then you can use converting washers with our adaptor (purchased separately) to reduce the aperture further. For more details about the Converter / Adaptor system, click here.


What's in the box
30 x Lampshade frame, epoxy coated
30 x Lampshade frame, epoxy coated with UK/EU fitting
30 x Self-Adhesive PVC panel
30 x Rolled Edge Finishing Tools
2 x 50mtr rolls of 9mm Tessa Tape ( Apply to rings)
1 x 25mtr roll of 12mm Seamstick Double-sided tape (Apply to seams)
1 x Instruction sheet A4 printed in full colour


Options
Some makers prefer to use Soft Furnishing Bond Tape or Tessa Tape for their seams instead of using Seamstick; therefore, you have the opportunity to exchange the tapes in options above.

What size will my covering need to be?
Your covering needs to be 1240mm wide x 260mm to cover the self-adhesive panel supplied.

 

Lampshade Assembled Size
30cm x 30cm x 21cm High

Lining Colour
White

Testing
Our lampshade materials have been tested and passed the glow wire test carried out by the Lighting Association.
Contact us for test certificates.

 

Packaging
Cardboard Box Size 1300mm x 410mm x 105mm

Weight
13 Kilos


How to Order
Select "Add to Cart" at the top of this page

 

Reviews

Write a review and let shoppers know what you think of this product.

Brand Dannells