Manufacturers Pack - DIY Table Lamp Kit - 30 x Tall Cylinder
£173.88 (inc. VAT)
We have made it easy for you to design and manufacture your table lamps using your covering of choice, any piece of fabric or wallpaper can be used with our manufacturing packs. All the essential components supplied compactly at the most economical rates with full instructions on how to make the table lamp.
Table lamp Assembled Size
150mm Diameter x 380mm high
What's in the box
30 x Table lamp ring 150mm, epoxy coated
30 x Table lamp ring 150mm, epoxy coated with utility fitting and built-in stand
90 x White plastic feet covers
30 x Self-adhesive panel (White liner) size 492mm x 368mm includes 14mm kiss cut
1 x 50mtr rolls of 9mm Tessa Tape ( Apply to rings)
1 x 25mtr roll of 12mm Seamstick Double-sided tape (Apply to seams)
30 x Rolled edge tool for finishing
"Everything you need to make 30 Table Lamps for only £4.83 per unit "
How do I make the Table Lamps
Easy to use, laminate your covering to the self-adhesive panel and follow the step by step instructions.
If you would like to view the instructions click here
Watch our Video
Click the link below
What size will my covering need to be?
Your covering needs to be 388mm x 512mm to fit over the self-adhesive panel supplied.
Tell me about the components in the box?
The self-adhesive panel is not just a piece of "sticky back plastic" It has been specially manufactured for lampshades. It has many treatments, including "Anti-Static" and "Anti Yellowing and is fire resistant. The frame included is made from top-quality heavy gauge wire and is painted white.
The double-sided tapes included in the pack are from Tessa the world's leading manufacturers of self-adhesive product manufactured in Germany.
What type of lamp holder will this Table lamp fit
The utility frame included in your kit will fit the standard bayonet cap (BC) lamp, holder.
It can also be used with Edison Screw (E27) lamp holders, simply remove the
converter plug in the centre of the utility fitting.
Electrical fittings which comprised of the lamp holder, plug and switched Cable are not included and need to be purchased separately for the UK or European plug and socket types.
Where can I purchase the Lamp holder, Plug and Switched Cable?
We supply them, see related items below for full product details, or you can order in the options below.
The units we sell are thoroughly tested in compliance with EU legislation for health and safety.
How do they fit?
Just connect the lamp holder to the utility ring, fit your bulb, then plug straight into your electrical socket and switch on using the online switch.
Maximum Wattage 40watt
We recommend the use of low energy bulbs with your floor lamp. They use less energy and are cool to the touch.
What about Product Testing and Safety?
The self-adhesive lampshade panel been tested in the Lighting Association Laboratories and has passed the glow wire test which is The British Standard for Luminaries. Any Fabrics, Textiles or Paper that is laminated to our panel will become fire resistant. Click here for test certificates.
Can I get any additional help?
If you have any queries, comments or issues simply contact us, we will be pleased to help.
Write a review and let shoppers know what you think of this product.