Evo-Stik Rapid Mitre Fix 50g 30618788

EVO-STIK Mitre Adhesive is an easy to use, two part adhesive designed primarily for bonding the mitre joints of picture frames; however it will also bond many other surfaces. It has a higher viscosity than most super-glues which, in conjunction with its fast setting nature, allows it to be used to bond porous materials such as wood.

Suitable materials: Picture frame mitre joints, porcelain, many rubbers, most common metals, some types of jewellery and most plastics.

Features
Easy to use
Temperature Resistance Range -20 to +80(+100)°C
MFR Part No. 351882
Drying / Bonding Time 60min.
Compatible Materials Metal

Sizes: 50g adhesive and 200ml aerosol activator.

DOWNLOADS

Safety Data Sheet   Glue  (COSHH)

Safety Data Sheet   Activator  (COSHH)

How To Use

PREPARATION
1 Work on a protected surface in a well-ventilated area.
2 Make sure all surfaces to be bonded are close-fitting, clean and dry.

APPLICATION
3 Remove the cap from the bottle of adhesive: on first use cut off the plastic seal on top of the nozzle.
4 Apply a single drop of the adhesive to one surface.
5 Shake the activator can well, and then lightly spray the other surface, in a well-ventilated area.
6 Bring the two together within 30 seconds and press firmly for about 10 seconds.