DIY Floor Lamp Manufacturers Pack - 30 units

Designing and manufacturing your own bespoke floor lamps couldn’t be easier than with our Lampshade Manufacturers packs. Containing all the essential professional lampshade components in one box, simply make, design or choose your covering of choice, whether it be fabric or wallpaper.

Developed to offer you the most economical commercial rates possible, a Lampshade Manufacturers pack makes it simple to offer bespoke, handmade lampshades at a profitable mark up.

Very easy to make, full lampshade making instructions are included, plus you can find professional lampshade making kit tutorials on our Dannells YouTube channel. In addition, we’re always happy to support you with our expert knowledge and extensive free resources.

Features

• Pack includes 30 Floor Lamp kits
• Lampshade assembled size is 20cm diameter x 70cm high
• Required covering size - 750mm wide x 670mm high
• Fits EU and UK lampholder fittings using a convertor/reducer adapter
• Includes professional lampshade making components which meet all relevant and required safety standards
• Includes both Tessa and Seamstick double-sided tape
• Lampshade PVC panels are stored flat for easy use
• All materials and components meet required professional and safety standards; fire retardancy, and glow wire testing by the Lighting Association

What's in the box?

• 30 x 20 cm Lampshade ring, epoxy coated
• 30 x 20 cm Lampshade ring, epoxy coated with fitting and built in stand
• 3 x white plastic feet
• 30 x Flat-packed Self-adhesive lampshade panels (size 728mm x 648mm)
• 1 x 50mtr rolls of 9mm Tessa Tape (to apply to rings)
• 1 x 25mtr roll of 12mm Seamstick Double-sided tape (to apply to seams)
• 30 x Rolled Edge Tools for finishing
• 30 x EURO to UK Lampshade Reducer/ Converter Adaptor
• 1 x Instruction sheet A4 printed in full colour

Tape choices:

If you prefer Soft Furnishing Bond Tape or Tessa Tape for your seams instead of Seamstick please choose your alternative tape in options above.

Electrical Fittings
To complete your Floor Lamp Kit you will need to purchase an E27 Lampholder with Switched Cable, or an B22 Lamp Holder with Switched Cable which are available with either a UK or European plug. See related items below.

What type of lamp holders will fit this lampshade?

The frame is manufactured to fit European lamp holders and a Converter/Reducer Adaptor plug is supplied to reduce the aperture to fit UK lamp holders.

• B22 Bayonet Cap Lampholders (UK) - Adaptor Fitted
• E14 Edison Screw Lampholders (EU) - Adaptor Fitted
• E27 Edison Screw Lampholders (EU) - Adaptor Removed
• E26 Edison Screw Lampholders (US) - Adaptor Removed

Bulb advice

We recommend the use of low energy bulbs with your lampshades, which are cool to the touch, avoiding the problem of scorching shades and ceilings.