600mm Diameter - Self Adhesive Panels

£9.37 Exc. VAT
£11.24 (inc. VAT)
PayPal Checkout
You will earn 11 points with this purchase
The panel will fit 600mm diameter lampshade rings leaving a 20mm overlap for the seam.

It's self adhesive extra rigid and can be used with your covering of choice - Fabric, Textile or Wallpaper can all be used. When laminated, your panel becomes flame retardant,  the material has passed the glow wire test carried out by the Lighting Association.

Choice of 4 heights available 150mm, 200mm, 250mm or 300mm  (Select below in variants)

How to use
  • Remove the release paper and place the panel over your covering ADHESIVE SIDE DOWN.
  • Turn the panel over so the covering is now face up and press the fabric into adhesive and smooth.
    (use Lamination Squeegee) click here for more details
  • Place the panel face down and cut surplus material by running a sharp knife along the edges of the panel.
  • Trim the surplus fabric and then remove the kiss cut strips.
  • Snap back the 13mm edges around the panel until the PVC breaks and remove leaving the covering.
  Cut the fabric Apply the panel trim the fabric Remove the kis-cut material

Your panel is now ready for assembly using the professional rolled edge lampshade making method.
To learn more about the rolled edge method click here

Release paper has a grid for easy covering alignment.
UV stable & flame retardant,
Engineered for lampshade making, passed the glow wire test carried out by the Lighting Association
Manufactured in the UK

Panel Length - 1905mm
Panel Height -  150mm, 200mm, 250mm or 300mm  (Select below in variants)
White PVC  Extra Rigid -  400 micron thickness

Lampshade panels


Write a review and let shoppers know what you think of this product.

Brand Dannells