40cm US Washer Fitting Circular Lampshade Ringset
Qty From | Qty To | Unit Price (Exc. Vat) |
---|---|---|
1 | £6.26 | |
2 | 11 | £4.69 |
12 | 99 | £3.13 |
100 | ∞ | £2.50 |
You will earn 7 points with this purchase
Suitable for making all types of circular rigid lampshades.
The Washer fitting (1/2" ring) is the most common lamp fitting in the US.
This fitting will fit lamps that use a harp or vertical rod system to hold the shade, the decorative finial can then be screwed on top.
Features
Set includes 2 painted lampshade rings. One ring has a standard washer 1/2" US fitting.
How much material do you need / panel sizes

The length needs to be 1265mm wide to go around the circumference of the rings
(includes 15mm for the overlap).
The height of the panel is determined by you, the height you would like the lampshade to be.
Specifications
40cm Diameter rings
3.25mm top quality heavy gauge wire
Epoxy coated /painted white (prevents rust)
Notes
Rings will have tiny uncoated spot where the ring has been hooked for spraying, this is not a fault
The Washer fitting (1/2" ring) is the most common lamp fitting in the US.
This fitting will fit lamps that use a harp or vertical rod system to hold the shade, the decorative finial can then be screwed on top.
Features
Set includes 2 painted lampshade rings. One ring has a standard washer 1/2" US fitting.
How much material do you need / panel sizes

The length needs to be 1265mm wide to go around the circumference of the rings
(includes 15mm for the overlap).
The height of the panel is determined by you, the height you would like the lampshade to be.
Specifications
40cm Diameter rings
3.25mm top quality heavy gauge wire
Epoxy coated /painted white (prevents rust)
Notes
Rings will have tiny uncoated spot where the ring has been hooked for spraying, this is not a fault
Brand | Dannells |