30cm x 130cm High - Floor Lamp Base Making Kit - Manufacturing Pack 15 Units

Designing and manufacturing your own bespoke Floor Lampbase couldn’t be easier than with our Lampbase Manufacturers packs.

Containing all the essential lampbhase components in one box, simply make, design or choose your covering of choice, whether it be fabric or wallpaper. Developed to offer you the most economical commercial rates possible, a Floor Lampbase Manufacturers pack makes it simple to offer bespoke, handmade bases at a profitable mark up.

How to make them
Very easy to make, full making instructions are included.
In addition, we’re always happy to support you with our expert knowledge and extensive free resources.

If you would like to view the instructions click here

Lampshade Requirements
We recommend using a 70cm drum shape lampshade using one of our kits, but you can select the size and shape as you wish. 

If you're not using one of our kits, your lampshade must have a utility Euro fitting.
To ensure compatibility, use a frame manufactured by us, so it has the correct drop.

You can also use a lampshade with a duplex ring fitted and then use the appropriate shade carrier to connect the lampshade and lamp base

Electrical Requirements
Primary Electrical Assemblies are available to fit these table and floor lamp bases, consisting of an E27 Lampholder, Switched Cable and UK or EU Socket Plug. You can select them in the options above and related items, 

However, with the extensive choice of fashionable electrical components available, including fabric cables, you can design your own to match your interior or requirement. These are the components you will need if you are making your own

* E27 Lampholder 
* Electrical Cable
* 3 x E27 Lampholder Shade Rings 
* UK (3pin) or EU (2pin) Mains Plug 

Always contact your electrical supplier or a qualified electrician for advice.

How to order your Electricals
We supply the electrical assembly for the lamp. See related items below.
We also supply more decorative options including textile cables, see our electrical products click here.

What's in the box

30 x Epoxy coated (painted) Steel Rings 300mm Diameter
15 x Stick-It ® panel - 1330mm x 970mm(Adheres to your covering)
15 x Foamex E27 Lampholder Disc
1 x 50mtr Roll of Double-Sided Self-Adhesive Tape  (to go on the rings)
1 x 25mtr Roll of Seamstick Double-Sided Self-Adhesive Tape (to go on the seams)
30 x Finishing Tool
1x Instruction Sheet
 

What size will my cover need to be?
Your covering must be 1350mm wide x 1000 mm to cover the supplied self-adhesive Stick-It ® panel. 

Floor Lamp Base Assembled Size
30cm Diameter x 130cm High

Bulb Advice
We recommend the use of low-energy bulbs with your lamp base. They use less energy and are cool to the touch, avoiding the problem of scorching shades and ceilings. Maximum 60 watt

How to Order
Select "Add to Cart" at the top of this page