30cm Ribbon Manufacturers Pack - 30 Drum Lampshades
£143.60 (inc. VAT)
These packs are designed for small manufacturers. They include all the essential components to make 30 x 30cm Drum Lampshades economically using your Ribbon, Lace or Yarn of choice.
What type of lamp holders will fit this lampshade?
The frame is manufactured to fit European lamp holders, and a Converter/Reducer Adaptor plug is supplied fitted to reduce the aperture
so it can fit UK lamp holders.
B22 Bayonet Cap Lampholders (UK) - Adaptor Fitted
E14 Edison Screw Lampholders (EU) Adaptor Fitted
E27 Edison Screw Lampholders (EU) Adaptor Removed
E26 Edison Screw Lampholders (US) Adaptor Removed
Harp & Finial Fittings
If you wanted to use the frame with a Harp & Finial fittings, used mainly in the USA, then you can use converting washers with our adaptor (purchased separately) to reduce the aperture further. For more details about the Converter / Adaptor system, click here.
We recommend using only flame retardant ribbon or yarn that is fire resistant. Ribbon that is cut on the bias or has some elasticity will work best as this will provide sufficient tension when wrapping to stop you being too heavy-handed when wrapping.
How much Ribbon or Yarn will I need?
That depends on the width of your Ribbon or yarn.
As an example, you would need 18 -20 mtrs of Ribbon that is 25mm wide to wrap this lampshade.
What’s in the box?
Each pack will contain an information sheet with preparation guidance.
50 x Lampshade ring, epoxy coated
50 x Lampshade ring, epoxy coated with fitting
50 x Flat-packed Plain PVC panels size 958mm x 210mm
2 x 50mtr rolls of 9mm Tessa Tape ( Apply to rings and seam)
1 x Instruction sheet
Your lampshade can be used in Europe and the UK (includes converter plug)
Lampshade Assembled Size
30cm Diameter x 21cm High
We recommend the use of low energy bulbs with your lampshades. They use less energy and are cool to the touch, avoiding the problem of scorching shades and ceilings.
Our lampshade materials have been tested and passed the glow wire test carried out by the Lighting Association.
Contact us for test certificates.
Cardboard Box Size 968mm x 305mm x 105mm
Write a review and let shoppers know what you think of this product.