30cm Drum Lampshade Making Kit & US (1/2") Washer Fitting

Qty From Qty To Unit Price (Exc. Vat)
1 £13.32
2 23 £11.10
24 99 £6.67
100 £6.67
PayPal Checkout
You will earn 15 points with this purchase

Design a lampshade to match your upholstery, curtains, wallpaper or any room theme.
Our kit makes you a professional 20cm Lampshade from the covering of choice that can be used with a harp or vertical rod system to hold the shade.

The kit includes the Washer fitting (1/2" ring) which is the most common lamp fitting in the US.

How to make them
Easy to use, laminate your covering to the self-adhesive lampshade panel and follow the step-by-step instructions.
If you would like to view the instructions click here

What size will my covering need to be?

Your covering needs to be 970mm wide x 255mm to cover the self-adhesive panel supplied.

What's in the box
1 x Lampshade ring, epoxy coated
1 x Lampshade ring, epoxy coated with US Washer(1/2") fitting
1 x Self-adhesive lampshade panel size 963mm x 238mm includes 14mm kiss cut.
1 x 6mtr roll self-adhesive tape
1 x Rolled Edge tool for finishing


Your lampshade can be used with a harp or vertical rod system to hold the shade.
The kit includes the Washer fitting (1/2" ring) the most common lamp fitting in the US.

Lampshade Assembled Size
30cm Diameter x 21cm High

Cardboard Box Size 33cm x 33cm x 5cm

Bulb Advice
We recommend the use of low energy bulbs with your lampshades. They use less energy and are cool to the touch, thus avoiding the problem of scorching shades and ceilings.

Our lampshade materials have been tested and passed the glow wire test carried out by the Lighting Association. Contact us for test certificates.

How to Order
Select "Add to Cart" at the top of this page

Lining colours
The self-adhesive panel supplied with the kit is White.  For an extra bit of pizazz use a metallic liner.

We can supply a Gold, Silver or Champagne panel with your Kit.

Finish your lampshade with a beautiful decorative trim. We stock Glass Beaded
Fringes,Tassels and Profiles. Take a look at our product range click here
Digital Printed Textile    
Using your artwork or illustration we provide you with a printed textile for your Lampshade Making Kit.
Alternatively you can pick a colour from our pantone chart for us to print.
Your design will be printed on to fabric and supplied with your lampshade making kit.

Send us your artwork or illustration.
Your artwork needs to be created 967mm wide x 248mm high. This size includes bleed and the allowance for the rolled edge and seam. If your design is precise you need to create to our design template that can be downloaded
Download the template by clicking here


Write a review and let shoppers know what you think of this product.

Brand Dannells