20cm x 100cm High - Floor Lamp Base Making Kit

Our Lamp Base Kit gives you the creative opportunity to design and make a floor lamp base using your covering of choice. This DIY creative kit makes a 20cm diameter x 100cm tall lamp base. 

Simply add your handmade lampshade and your electrical fitting, and your floor lamp is complete.

How to make them
Easy to use, laminate your covering to the self-adhesive Stick-It ® panel and follow the step-by-step instructions.
If you would like to view the instructions click here

Video tutorial
If you would like to view our video tutorial click on the link below.

Lampshade Requirements
We recommend using a 45cm Drum Lampshade using one of our Lampshade Making Kits, but you can select the size and shape as you wish. 

If you're not using one of our Lampshade Making Kits, your lampshade must have a utility Euro fitting.
To ensure compatibility, use a frame manufactured by us, so it has the correct drop.

You can also use a lampshade with a duplex ring fitted and then use the appropriate shade carrier to connect the lampshade and lamp base

Electrical Requirements
Primary Electrical Assemblies are available to fit these table and floor lamp bases, consisting of an E27 Lampholder, Foot Switched Cable and UK or EU Socket Plug. You can select them in the options above and related items, 

However, with the extensive choice of fashionable electrical components available, including fabric cables, you can design your own to match your interior or requirement. These are the components you will need if you are making your own

* E27 Lampholder 
* Electrical Cable
* 3 x E27 Lampholder Shade Rings 
* UK (3pin) or EU (2pin) Mains Plug 

Always contact your electrical supplier or a qualified electrician for advice.

How to order your Electricals
We supply an electrical assembly for the lamp. See related items below.
We also supply more decorative options including textile cables, see our electrical products click here.

What's in the box
2 x Epoxy coated (painted) Steel Rings 200mm Diameter
1 x Stick-It ® panel - 1030mm x 650mm(Adheres to your covering)
1 x Foamex E27 Lampholder Disc
1 x 6mtr Roll of Double-Sided Self-Adhesive Tape
1 x Finishing Tool
1x Instruction Sheet

What size will my cover need to be?
Your covering must be 1050mm wide x 670 mm to cover the supplied self-adhesive Stick-It ® panel. 

Floor Lamp Base  Assembled Size
20cm Diameter x 100cm High

Bulb Advice
We recommend the use of low-energy bulbs with your lamp base.
They use less energy and are cool to the touch, avoiding the problem of scorching shades and ceilings. Maximum 60 watt

Box Dimensions
Packed in an individual box 
660mm x 210mm x 55mm

How to Order
Select "Add to Cart" at the top of this page