20cm Manufacturers Pack - 50 Drum Double-Sided Lampshades

£195.65 Exc. VAT
£234.78 (inc. VAT)
You will earn 234 points with this purchase

We have made it easy for you to design and manufacture your own double-sided lampshades using your coverings of choice.
All the essential components supplied compactly at the most economical rates with full instructions on how to make double-sided lampshades.

The panel is self-adhesive both sides and can be used with your coverings of choice - Fabric, Textile or Wallpaper can all be used.
When laminated, your panel becomes flame retardant, and the material has passed the glow wire test carried out by the Lighting Association

What type of lamp holders will fit this lampshade?
The frame is manufactured to fit European lamp holders, and a Converter/Reducer Adaptor plug is supplied fitted to reduce the aperture
so it can fit UK lamp holders. 

Lampholder Types
B22 Bayonet Cap  Lampholders (UK) -  Adaptor Fitted
E14 Edison Screw Lampholders  (EU)    Adaptor Fitted
E27 Edison Screw Lampholders  (EU)    Adaptor Removed
E26 Edison Screw Lampholders  (US)    Adaptor Removed

Harp & Finial Fittings
If you wanted to use the frame with a Harp & Finial fittings, used mainly in the USA, then you can use converting washers with our adaptor (purchased separately) to reduce the aperture further. For more details about the Converter / Adaptor system, click here.

What's in the box
50 x Lampshade ring, epoxy coated
50 x Lampshade ring, epoxy coated with fitting
50 x Flat packed Self-Adhesive double-sided panels size 646mm x 180mm
  1 x  25mtr roll x 15mm Self Adhesive PVC Strip  (reusable)
  2 x 50mtr rolls of 9mm Tessa Tape ( Apply to rings)
  1 x 25mtr roll of 12mm Seamstick Double sided tape (Apply to seams)
50 x Rolled Edge Tools for finishing
1 x Instruction sheet A4 (4pages) printed in full colour

Some makers prefer to use Soft Furnishing Bond Tape or Tessa Tape for their seams instead of using Seamstick; therefore, you have the opportunity to exchange the tapes in options above.

How to use
To view our instructions. how to make a Double-Sided Lampshade click here or click the link below.

Video tutorial
If you would like to view our video tutorial click on the link below.


Lampshade Assembled Size
20cm Diameter x 18cm High

What size will my covering need to be?
Your covering needs to be 655mm wide x 190mm to cover the self-adhesive panel supplied

Cardboard Box Size 968mm x 305mm x 105mm

11 Kilos

How  to order
Select add to cart at the top of this page.

We also supply lampshade diffusers, cellophane for wrapping the lampshades when assembled and wattage labels.
See related products below.


Write a review and let shoppers know what you think of this product.

Brand Dannells