20cm Lamp Making Circular Ringset
20cm Lamp Making Circular Ringset
20cm Lamp Making Circular Ringset
20cm Lamp Making Circular Ringset
20cm Lamp Making Circular Ringset

20cm Lamp Making Circular Ringset

Qty From Qty To Unit Price (Exc. Vat)
1 £4.97
2 11 £4.35
12 99 £3.11
100 £2.49
You will earn 5 points with this purchase
A lamp making ringset is basically a lampshade that has a built in stand so when its built to your desired height it can be used on any table or floor area, It's completely self-supporting.  Connect your electrics (Lamp holder, Plug and Switched Cable) and you have a fabulous lighting product.

What type of lamp holder will this frame fit?
The lamp making frame included in your kit will fit the standard bayonet cap (BC) lamp holder.
This is the most common type of lamp fitting in the UK today. It can also be used with Edison Screw (E27) lamp holders, most common in Europe, simply remove the converter plug in the centre of the fitting.

What’s included
The Lamp frameset includes 2 painted lampshade rings as described below

Plain Ring - Painted White  
This is fitted in the top of your Lamp 

Utility Ring - Painted White
This is fitted in the bottom of your Lamp and connects to your electrics.
It has a standard 40mm European fitting which is fitted with a 25mm converter plug.
The utility ring has legs with plastic feet so it can sit on a table or the floor.

How high is the lamp from the surface area ( table or floor)
The gap between the surface area and the lamp frame will be 40mm
Which is the Height of the legs on the utility ring

How much material do you need / panel sizes

The length needs to be 643mm wide to go around the circumference of the rings
(includes 15mm for the overlap). The height of the panel is determined by you, the height you would like the lamp to be.

How to make them
If you would like to see some information on how to use the frames take a look at our DIY Table & Floor Lamp making kit instructions click here

20cm Diameter rings
3.25mm top quality heavy gauge wire
Epoxy coated /painted white (prevents rust)
Complete with converter plug for European fittings

Rings will have tiny uncoated spot where the ring has been hooked for spraying, this is not a fault

Options  (order in related items below)

Lampshade Panels
We can also supply Self Adhesive Lampshade panels to go with the ring, we offer 4 heights for this frame, 150mm, 200mm, 250mm and 300mm.

We can supply a lamp holder with fitted plug and switched cable that has been electrically tested.
Once you have built your lamp you can use this fitting to light it up. 

We have fittings for the UK and Europe click here to view them.


Write a review and let shoppers know what you think of this product.

Brand Dannells