200mm Triangle - Self Adhesive Panel

£4.09 Exc. VAT
£4.91 (inc. VAT)
You will earn 4 points with this purchase
The panel will fit 200mm Triangle lampshade frame set leaving a 15mm overlap for the seam. It's self adhesive and can be used with your covering of choice - Fabric, Textile or Wallpaper can all be used. When laminated, your panel becomes flame retardant,  the material has passed the glow wire test carried out by the Lighting Association. Our panel is fitted with kiss cut edges and is precreased to fit around the frame for easy assembly.

Choice of 4 heights available 150mm, 200mm, 250mm or 300mm  (Select above in variants)

How to use
  • Remove the release paper and place the panel over your covering ADHESIVE SIDE DOWN.
  • Turn the panel over so the covering is now face up and press the fabric into adhesive and smooth.
    (use Lamination Squeegee) click here for more details
  • Place the panel face down and cut surplus material by running a sharp knife along the edges of the panel.
  • Trim the surplus fabric and then remove the kiss cut strips.
  • Snap back the 13mm edges around the panel until the PVC breaks and remove leaving the covering.


Your panel is now ready for assembly using the professional rolled edge lampshade making method.
To learn more about the rolled edge method click here

Features
Release paper has a grid for easy covering alignment.
UV stable & flame retardant.
Kiss Cut edges
Pre Creased to fit round the frame
Engineered for lampshade making, passed the glow wire test carried out by the Lighting Association
Manufactured in the UK

Specifications
Panel Length - 915mm
Panel Height -  150mm, 200mm, 250mm or 300mm  (Select above in variants)
White PVC -  300micron thickness
Fitted with 13mm Kiss cut edges
Pre Creased to fit around the frame

Related Products
We also sell lampshade frames to fit the panel see below.

Reviews

Write a review and let shoppers know what you think of this product.

Brand Dannells